STANLEY Rush Pivot or Hinged Swing Doors

Style and strength

- Pivot doors are an excellent selection for applications that require a large opening with minimal floor space interruption. Pins are located at the top and bottom of the frame, allowing the door to pivot. Each door’s pivot point is custom located by request; center and off center pivot locations are available (subject to engineering approval).
- Heavy duty hinged doors available based on custom architectural design.
- Pivot doors are an excellent selection for applications that require a large opening with minimal floor space interruption. Pins are located at the top and bottom of the frame, allowing the door to pivot. Each door’s pivot point is custom located by request; center and off center pivot locations are available (subject to engineering approval).
- Heavy duty hinged doors available based on custom architectural design.

STANDARD

Tempered Glass Doors
Heavy Extruded Corner And Bearing Bracket
Snap On Covers With No Visible Screws
Overhead Concealed Door Closer
Full Perimeter Weather Sweeps

OPTIONS

Center Pivot (Concealed)
Offset Pivot (Exposed)
Hinged Doors
Locking
Access Control
Panic Exit Devices
Virtually Any Special Hardware Requirements Can Be Applied As Required
All Glass Design With Top And Bottom Rail Only
STANLEY Magic Force Automatic Operator

MODELS

Series 10, 30, 40, 60

Standard Door Dimensions

A - Door Opening

Width B – Clear Opening Width

* 3’ – 0” (914)

2’-8 3/8” (822)

* 3’ – 6” (1067)

3’-2 3/8” (975)

* Denotes standard size doors in 7’-0” (2134) height. All other sizes and heights are custom fabricated and finished to suit specific job requirements.

All door packages are custom manufactured to fit your job requirements up to ¼” increments. For sizes greater or smaller than typical, contact STANLEY Rush: 888-301-5407 | e-mail estimating | e-mail sales | e-mail general questions