Pivoted or Hinged Swing Doors
Why Pivot Doors?
Pivot doors are an excellent selection for applications that require a large opening with minimal floor space interruption. Pins are located at the top and bottom of the frame, allowing the door to pivot. Each door’s pivot point is custom located by request; center and off center pivot locations are available (subject to engineering approval).
Style and Strength
Heavy duty hinged doors available based on custom architectural design.
Speak with an Expert
STANLEY Pivoted/Hinge
Tempered Glass Doors
Heavy Extruded Corner And Bearing Bracket
Snap On Covers With No Visible Screws
Overhead Concealed Door Closer
Full Perimeter Weather Sweeps
Center Pivot (Concealed)
Offset Pivot (Exposed)
Hinged Doors
Locking
Access Control
Panic Exit Devices
Virtually Any Special Hardware Requirements Can Be Applied As Required
All Glass Design With Top And Bottom Rail Only
STANLEY Magic Force Automatic Operator
Series 10, 30, 40, 60
| Standard Door Dimensions | ||
|---|---|---|
| A - Door Opening |
* 3’ – 0” (914) |
* 3’ – 0” (914) |
| Width B – Clear Opening Width |
2’-8 3/8” (822) |
3’-2 3/8” (975) |
* Denotes standard size doors in 7’-0” (2134) height. All other sizes and heights are custom fabricated and finished to suit specific job requirements.
Bi-Fold Automatic Doors
Features & Benefits
- 2 and 4 panel options can cover openings from 48” to 120” with a package height of up to 110”. Size limits are based on total weight of door package.
- Heavy duty pivots for durability
- Finger guards for safety
- Laminate lock/flush bolts
- Redundant safety sensors and advanced activation sensors
- Door panels fold in or out for the most efficient use of space at entrances or exits
All door packages are custom manufactured to fit your job requirements up to ¼” increments. For sizes greater or smaller than typical, contact your authorized STANLEY Access Technologies Sales Representative.
Speak with an Expert
The SB600 Series is a retrofit-ready or new construction automatic bifolding door that allows for two-way traffic where there are currently restricted rough openings. Panels fold when retracting which allows for about 70% of the door’s package to be free and clear for passage.
SB600 Automatic Bifold Doors
| Design | 2 or 4 panel |
| Breakout | All panels |
| Finish | Clear or Dark Bronze Anodized | OPTION: Special Finishes Available |
| Height* | 2 Panel, Single Pane Glass: 7’-6” (2.3m) Minimum 8’-6” (2.6m) Maximum (Double Pane Glass Not Available) 4 Panel, Single Pane Glass: 7’-6” (2.3m) Minimum 9’-2” (2.8m) Maximum 4 Panel, Double Pane Glass: 7’-6” (2.3m) Minimum 9’-2” (2.8m) Maximum |
| Width* | 2 Panel, Single Pane Glass: 4’ (1.2m) Minimum 5’-2” (1.6m) Maximum (Double Pane Glass Not Available) 4 Panel, Single Pane Glass: 6’ (1.8m) Minimum 10’ (3m) Maximum 4 Panel, Double Pane Glass: 6’ (1.8m) Minimum 8’ (2.4m) Maximum |
| Typical Door Panel Weight | Up to 100 pounds each (45kg) |
| Power Required | 120 VAC, 5 amps, minimum |
| Drive System | STANLEY M-Force Swing Door Opener |
| Controller |
High Resolution iQ Controller, Microprocessor Based, Safety Logic |
| Activation/Safety Sensors |
2 motion sensors and 1 presence sensor (fold side) for safety |
| Codes and Standards | UL, cUL, ANSI/BHMA A156.10 |
*THE DESIGN CRITERIA LISTED IS A RANGE OF WIDTHS AND HEIGHTS AVAILABLE TO THE BIFOLD SB600 SERIES. PLEASE NOTE THAT THE SIZE LIMITS ARE BASED ON THE WEIGHT OF A BIFOLD DOOR PACKAGE. AS THE DOOR PACKAGE WIDTH INCREASES, THE MAXIMUM DOOR PACKAGE HEIGHT DECREASES.
All Specifications are subject to change. Please contact your local sales representative to ensure accuracy.
sensors required
up to 700 lbs
up to 48"
Associations
STANLEY Access Technologies is a proud and active member of various industry and trade organizations. These best-in-class associations reflect our commitment to making the world accessible.
